About Us
Stihl Website
Stihl Website
Saw Supplies
Logging Equipment &
Supplies
We stock a wide selection of chain saw supplies for all your logging and firewood cutting
needs; including saw bars & tip sprockets, chain, files, mix and chain oils, chain breakers,
sharpening stones, tools and file guides.
Saw Chain
We stock the complete range of saw chain manufactured by Stihl and Oregon, from
Harvester chain all the way down to picco micro for the smallest saws. You can purchase
chain made into loops or by 25 to 100 foot bulk rolls.

Determining the correct chain for your saw can be complicated by the following factors:

Pitch - the distance between each chain link: .325", 3/8", .404" are the common ones

Gauge - the thickness of the drivers that fit into the saw bar slot: .043", .050", .058" and
.063"

Driver Count - depends on the length of bar you have, and the pitch of the chain used

Chain Style - Skip Tooth (2 links between cutter teeth) or Full House (1 link between cutter
teeth).

To make it easy for us to supply you with the correct chain for your saw, if you are unsure
about any of the above criteria, we recommend that you bring in your old chain or chainsaw
if possible.
Manager's Special! 30% off list price if you buy 3 or more chain
loops of any type. We will also make up entire chain rolls into
loops at no extra charge.
We will make chain loops for ALL makes of chainsaw while you wait!
Since the development of the first chipper chain more than half a century ago Oregon®
has been, and remains, at the forefront of chainsaw cutting-systems technology and
continues to produce the most advanced line of cutting chain available today.
STIHL saw chains are characterized by unrivalled technology and manufacturing quality:
cutters of highalloyed chrome-nickel steel, finely machined holes in the links and hardened
rivets. When combined with the STIHL Ematic System and the wear-reducing STIHL
Oilomatic® system, a STIHL chain saw is guaranteed economical use as well as a long
service life.
Saw Bars
All STIHL guide bars have induction heat-treated edges to give high wear resistance. The
heat treating process hardens the rails while allowing the rest of the bar to remain flexible.
This makes it less likely for the bar to have a permanent bend if it were flexed during use.
Stihl guide bars are also symmetrical. Over time, they can be flipped over to spread out
the wear, increasing the service life of the bar.

The STIHL ROLLOMATIC® ES Light guide bar has 30% less weight in comparison with
STIHL ROLLOMATIC® E Super guide bars. To reduce weight, the solid bar (made of the
same tough wear-resistant steel) is milled out and filled with aluminum to make it up to
30% lighter than the ES Super. The reduced weight improves the chain saw balance and
decreases operator fatigue, especially on longer bars.

We Stock Stihl Light Bars !
The ultimate guide bar for professional cutters. All the benefits of our Power
Match® bar plus extra features big timber cutters want. Blended nose and body
surfaces reduce bar thickness for less binding in kerf.
OREGON® PRO Bars
Many giant timber-harvesting machines equipped with bar-and-cutting-chain
felling heads are equipped with Oregon bars. We offer solid bars with sprocket
noses, solid bars, and replaceable-sprocket-nose bars.
OREGON® Harvester Bars
Every Cannon bar is individually made by skilled craftsmen. Mass-produced
chainsaw bars cost less, but do not match our quality standards. Quality involves
the expertise and experience that only a journeyman bar man possesses.
Cannon Bars
Serving the Coast Since 1978
8640 Wollason Street
PO Box 2129
Port Hardy, B.C.,Canada V0N 2P0
Text us at: 250-230-8442
Fax: 250-949-8446
Hours: Monday-Friday: 7:30am-5:30pm
Saturday: 9am - 5pm
Phone: 250-949-8442
Email:
Tollfree: 1-888-566-0992